The Radio Law requires model approval for specified radio equipment (ie, compliance with technical regulations). Certification is mandatory and the certification body is a registered certification body accredited by the MIC within the scope of the designated radio equipment. TELEC (Telecom Engineering Center) is the main registered certification body for Japanese radio equipment compliance certification. (1) TELEC certification standards The technical standards for certification refer to the classification and technical standards of the specified radio equipment listed in the official website technical compliance certification system. It is worth noting that when these technical standards differ from the technical requirements of the Radio Regulatory Commission Rules No. 18, the Radio Regulations shall prevail. (2) Type of certification TELEC certification includes Test Certification and Type Certification. Test certification is performed for each device unit. This certification is valid only for each verified device unit. The test items for WiFi and Bluetooth products are basically similar to the European standard EN300 328. Among them, 2.4GHz WiFi products (802.11b) /g, 2412~2472 MHz) and Bluetooth products use the standard MIC Notice No.88 Annex43, but 14 channels (Channel 14:2471 ~ 2497MHz) for 2.4GHz WiFi products need to be tested and issued separately using Annex44. The corresponding fees also need to be increased. For the 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard is Annex45, but it should be noted that the data shows that the MIC will modify the Annex45 in the near future, and the 5.6GHz device (Band W56) will also be Classified into Annex 45 and have more stringent DFS testing requirements for the Band 56 band.
Information required for TELEC certification
(1) Technical model specification sheet
(2) Quality Management System Statement
(3) Quality Control Confirmation Method or Manufacturer ISO 9001 Certificate
(4) Confirmation of construction guarantee
(5) Rated power statement
(6) Antenna report
(7) Test report (including test results, test setup photos and inspections performed)
(8) Block diagrams, schematics, bill of materials, parts placement, IC data sheets, internal and external photographs, product descriptions, user manuals, operating/technical instructions, accessories descriptions)
(9) Label information (label position, label content)
(10) If you are acting as an agent or authorized representative manufacturer, you still need a letter of trust/authorization letter.
Description:
1. All submitted documents are recommended as Japanese documents, and English documents are accepted. Test reports can be in the language of the local testing organization.
WLAN, TELEC certification for Bluetooth products;
2. TELEC is a mandatory certification for wireless products in Japan, and some are similar to the domestic SRRC. It follows the Japanese radio wave method. The specific test specification is to comply with the MIC (Japan Ministry of Internal Affairs and Communications) Notice No. 88 regulations
3. WiFi and Bluetooth products The test items are basically similar to the European standard EN300 328. The 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products use the standard MIC Notice No.88 Annex43, but 14 channels (Channel 14:2471 ~ 2497MHz) for 2.4GHz WiFi products need to be separate. Test and issue reports using Annex44.
4. For the 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band), the test standard is Annex45, but it should be noted that the data shows that the MIC will modify the Annex45 in the near future, and the 5.6GHz device (Band W56) ) also falls into Annex 45 and has more stringent DFS testing requirements for the Band 56 band.
All of the above specifications go back to Annex 1, so you should also pay attention to the contents of Annex 1 when referring to the above criteria.
Certification period
Around four weeks, depending on the specific product
NTEK advantage
NTEK is a professional agent Telec certification body, National CNAS Authorized Laboratory (L5516). NTEK has a team of experienced Telec certification experts to provide you with one-to-one Telec certification program. It has the strength to provide customers with comprehensive one-stop testing and certification services for the products of various countries, helping your products sell well all over the country.
Free question answering line:
0769 23301618
Any questions about testing and certification, we will give you the full answer, service to your satisfaction!
